Tripod adapter for Peak Design plate v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tripod adapter for Peak Design plate with latch and button on compliant lever integrated into print.
- Ocena
- 4,7 / 5
- Polubienia
- 112
- Pobrania
- 363
- Wydruki
- 10
- Wyświetlenia
- 1929
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Tripod adapter for Peak Design plate v3 has integrated latch and easily accessible eject button on compliant lever. The adapter has standard ¼" (6,35mm) threaded hole for tripod mounting. There is also screw mount adapter in the files (added 22/07/07).

There are inside slots in the model to add perimeters and reinforce the model where needed, so please don't remove them.

Printing:
It is better to use PETG due to it's flexibility. I used 3 perimeters and Thick bridges option ON. Then you need to turn on supports because of the button that protrudes from the body.
Post processing:
1/ remove support that's under the button
2/ push a lot on the button to break it from the body
Also check out:
https://www.youtube.com/channel/UChKp-968z1i5PN29gbR7YfA
https://www.cgtrader.com/rorys3d