1 / 19
Clutch pedal (game controller) — zdjęcie 1
1 / 19

Clutch pedal (game controller)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A custom made clutch pedal extension for Logitech Driving Force GT. Fits next to the original pedal set. I plan to…

Ocena
0 / 5
Polubienia
10
Pobrania
84
Wydruki
0
Wyświetlenia
1617
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

A custom made clutch pedal extension for Logitech Driving Force GT.

Fits next to the original pedal set. I plan to screw those together.

In addition to the printed parts you will need

  • a long enough 6 mm bolt or a piece for 6 mm threaded rod
  • couple of 6 mm nuts and spacers
  • 4 x 3mm screw to connect the pedal to the pedal arm
  • possibly some screws to mount everything on a platform
  • electronics to drive the thing

For electronics I used a PIC18F2550 microcontroller on a stripboard to read input from a limit switch connected to the pedal assembly and to provide USB connectivity. Photos and a Lochmaster 4 files are included to show the stripboard design. Board is installed inside the pedal.

Included source code for PIC18F2550 requires CCS C compiler to build.

Category: DIY

Tagi