Clutch pedal (game controller)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom made clutch pedal extension for Logitech Driving Force GT. Fits next to the original pedal set. I plan to…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 84
- Makes
- 0
- Views
- 1,617
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
A custom made clutch pedal extension for Logitech Driving Force GT.
Fits next to the original pedal set. I plan to screw those together.
In addition to the printed parts you will need
- a long enough 6 mm bolt or a piece for 6 mm threaded rod
- couple of 6 mm nuts and spacers
- 4 x 3mm screw to connect the pedal to the pedal arm
- possibly some screws to mount everything on a platform
- electronics to drive the thing
For electronics I used a PIC18F2550 microcontroller on a stripboard to read input from a limit switch connected to the pedal assembly and to provide USB connectivity. Photos and a Lochmaster 4 files are included to show the stripboard design. Board is installed inside the pedal.
Included source code for PIC18F2550 requires CCS C compiler to build.
Category: DIY