Self-Watering Mini Planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact model for those with limited space!
- Ocena
- 5 / 5
- Polubienia
- 68
- Pobrania
- 169
- Wydruki
- 1
- Wyświetlenia
- 1295
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A nice little planter that can fit practically anywhere! The side panel inserts allow you to customize your planter with whatever colors you want. You will need to print two of each size panel to fill out all four sides. There are three variations of the panels included here; cut, raised, and blank (see model files for difference.) You can print the blank ones as they are or use them to create your own designs. There is a version of the outer pot that has the hexagon pattern embossed into the sides and does not need panels.
I recommend putting a bit of cotton cloth in the bottom to cover the holes. This will help keep soil from being swept out of the inner pot and can help bring water up higher. If your panels have trouble fitting, very slight trimming may be needed.
Print Settings
- Layer Height – 0.2mm
- Material – PETG, PLA, or other
- Infill – 15% Honeycomb
- Perimeters – 3
- Top Fill Pattern – Octagram Spiral
- Bottom Fill Pattern – Octagram Spiral
- Seam Position – Aligned
- Ironing – 20% at 0.09mm spacing (for outer pots only)
My Other Plant Pot Designs