Eufy Spaceview Frame attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
See your baby with nothing blocking the view!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 840
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I was in need of a holder that extends the Eufy Babyphone Spaceview outwards from our bed.
I used the design of elcojacobs for the camera holder - very nice fit - and added the bed frame holder.
It is a 23mm gap, so the holder sits snug on the bed frame. The camera is extended by one full Spaceview length, allowing for a positioning without anything in the cameras view.
It sis two part print, which can be easily attached some ca glue or double sided tape. No supports needed!
If you enjoy the model, please leave a quick like or make! That encourages me more than anything :)