DND Magnet Tiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick locking 3x3 magnet tiles. the magnets are the Magcraft Square 0.25" x 0.25" x 0.100" Neodymium-Fe-B.
- Ocena
- 0 / 5
- Polubienia
- 102
- Pobrania
- 261
- Wydruki
- 0
- Wyświetlenia
- 3234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
printed flat with no supports. you can print 3x3 down for a extra smooth finish or on a textured sheet for some texture. I used PLA at 0.2mm layer height. the magnets are configured in the top and left with the north out and the bottom and right with the south out. I find that this gives you endless possibilities for configuration. I scuffed the non showing side and edges with sand paper and super glued them in and let them sit for like 24 hours for a full cure(slightly sanding the magnet hole also promotes adhesion).
https://i.imgur.com/s4QDDXJ.gif for an example of how they work.
MK8 does not require glue. the magnets get inserted during printing.