DND Magnet Tiles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick locking 3x3 magnet tiles. the magnets are the Magcraft Square 0.25" x 0.25" x 0.100" Neodymium-Fe-B.
- Rating
- 0 / 5
- Likes
- 102
- Downloads
- 261
- Makes
- 0
- Views
- 3,234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Attribution — Noncommercial
printed flat with no supports. you can print 3x3 down for a extra smooth finish or on a textured sheet for some texture. I used PLA at 0.2mm layer height. the magnets are configured in the top and left with the north out and the bottom and right with the south out. I find that this gives you endless possibilities for configuration. I scuffed the non showing side and edges with sand paper and super glued them in and let them sit for like 24 hours for a full cure(slightly sanding the magnet hole also promotes adhesion).
https://i.imgur.com/s4QDDXJ.gif for an example of how they work.
MK8 does not require glue. the magnets get inserted during printing.