Monoprice MP Select Mini Spool Holder Remixed Larger and Longer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Toys spool holder for the Monoprice MP Select Mini. I love the spool holder and have been using it…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 3
- Wyświetlenia
- 265
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a remix of Toys spool holder for the Monoprice MP Select Mini. I love the spool holder and have been using it for a while but I noticed that the spools rub on the mounting bracket and the spools sit off center of the spindle as the bracket pushes the spool back. I took the design and extended the arms out farther to stop the spool rubbing and I also raised it up a bit as well.
----Apparently I uploaded the wrong file originally, new file uploaded, all should be fine now hopefully--- I now it works, I'm using it with my printer
Print Settings
Printer:
mp select mini
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
your choice
Infill:
50 to 100
Notes:
I printed it at 100% infill as it does need to hold the weight of the spool, but it's your choice really. If you think less fill will work then go for it.
As far as supports, print it with the holes side down and the mounting bracket up vertically with supports everywhere, at least that's how I printed it and it worked for me.
I included the original spindle and pin for you, no change to them as they're fine.
Post-Printing
Clean up
Depending what type of supports you use there may be a bit of clean up work to do cleaning out the mounting bracket holes etc. The pin is tight going into the mounting holes especially if supports in holes, need quite a bit of clean up.
The mounting bracket is a tight fit on the printer but I like it that way so it won't move at all.
Category: 3D Printer Accessories