1 / 3
WLToys 144001 big tires (maybe 124019/18 and 104001?) — zdjęcie 1
1 / 3

WLToys 144001 big tires (maybe 124019/18 and 104001?)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Big tires that should also work on asphalt. Diameter is around 95mm (3.74").

Ocena
5 / 5
Polubienia
29
Pobrania
188
Wydruki
3
Wyświetlenia
810
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

For use on porbably every terrain. I still have to test them myself. If you prefer the underside of the printed part to be on the outside/inside of the TPU parts (maybe because you use a textured printbed), feel free to mirror the TPU.stl. I tested the first print and it worked right from the printbed. The hexagonal hole is a tight fit depending on your printer tuning.

Front wheel is slimmer (25mm) vs the wheels on the back (30mm). Just for the looks :D

 

I used the following settings:

PLA (or PETG): 4 perimeter, 35% infill, 4 top and bottom layers, temp as needed, support!

TPU: 2 perimeter, 0% infill, 4 top and 4 bottom layers, temp as needed, NO support ;)

 

The two parts fit together tight and you should be able to use them without glue. However, it might be best to glue them together anyway.

 

Also have a look at my other tires for that model. The PLA parts are interchangable.