WLToys 144001 big tires (maybe 124019/18 and 104001?)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Big tires that should also work on asphalt. Diameter is around 95mm (3.74").
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 187
- Makes
- 3
- Views
- 807
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
For use on porbably every terrain. I still have to test them myself. If you prefer the underside of the printed part to be on the outside/inside of the TPU parts (maybe because you use a textured printbed), feel free to mirror the TPU.stl. I tested the first print and it worked right from the printbed. The hexagonal hole is a tight fit depending on your printer tuning.
Front wheel is slimmer (25mm) vs the wheels on the back (30mm). Just for the looks :D
I used the following settings:
PLA (or PETG): 4 perimeter, 35% infill, 4 top and bottom layers, temp as needed, support!
TPU: 2 perimeter, 0% infill, 4 top and 4 bottom layers, temp as needed, NO support ;)
The two parts fit together tight and you should be able to use them without glue. However, it might be best to glue them together anyway.
Also have a look at my other tires for that model. The PLA parts are interchangable.