Arcade Button Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Arcade button in a box for the sake of clicky satisfaction
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 861
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- GNU General Public License v3.0
General Info
Our son (1 year old) loves to click and press tactile things, so this box was made to house an arcade button and simply increment a counter every time it is pressed. The total count is stored in EEPROM for data persistence and is displayed on a small OLED panel using an attiny85.
Theo presses button, counter goes up and inverts colors, everyone is happy.
Technologies
- Fusion 360
- Arduino
Setup
Print the box and wire the attiny85 to an 18650 for power and to a 32x128 OLED for the output, reference the Arduino code for pin definitions.
This is a very simple bit of code so feel free to modify as needed or desired.
Usage
Power on the device and start clicking!
Notes
Occasionally the count is not stored reliably, I suspect this is due to my relative inexperience with EEPROM.