Dragon Ball Pilafs Castle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modeled Pilafs castle from the original Dragon Ball as reference. Features gates that can be opened and closed.
- Ocena
- 0 / 5
- Polubienia
- 64
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 1492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Grew up with Dragon Ball and re-watched the anime with my son. He was enjoyed the first scene were Goku transforms and trashes the castle.. Since we already got the Goku Ape figure I was forced to model the castle so that he could destroy it and rebuild it. All references taken from the Anime and Manga.
I used 3 different PLA filaments.
PLA Natural for base structure, PLA Grey for satellite dish and Gate, PLA Red for roofs
Start by printing the plugs and satellite dish first and tune your printer! Sheet adhesion is important. If you can reliably print the plugs and satellite , the rest shouldn't be a problem!
For the really small parts slow the printer speed down and print at 0.1 mm. You might need ti brim some small parts. Layer width needs to be reduced if you really want the textures to show on the parts.
for the large parts print 0.15 or 0.2 (depens on how much detail you want)
For the Gates, rotate 45° on sheet.
Infill of 15% is enough.
No supports needed. Glue needed for satellite dish and the base.