Magnum Opus - Fits Nerf Retaliator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts your Nerf Retaliator from top prime to pump action. Attachment rails are standard picatinny.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 942
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Print as imported into slicer program with supports. It is also recommended to block supports at all holes; only the picatinny rail, “Rear sling point”, and “Front Align with Sling Point” require supports. Recommended to print with 4-5 walls for strength, PETG preferred.
Pump hardware requires (2) M4 x 8mm bolts, (2) M4 x 12 mm bolts, (2) plain M4 hex nuts (nested in pump grip), and (2) ½ inch aluminum flat bar (minimum length ~ 190mm each). Top Prime connector and N-Strike connector are mated with (1) M3 x 8mm bolt and M3 hex nut (nylon or plain). Rails are standard 1-inch PVC pipe (Length pictured ~235mm). Furniture grade PVC was used for this project. Cutting both PVC rails the same length will result as pictured; the top rail will be slightly longer. PVC fittings are drop-in fit and are set with (8) M3 x 12 coarse thread screws. “Muzzle” and “Bottom cap” are epoxied/superglued in place.
Flat bar was drilled and tapped. PVC requires drilling pilot holes.
Pump grip currently only has 1 slot available for mounting hardware, as this was designed for use with Worker's Stubby grip.
Printed sight files are available on my profile here.
This release is final - please let me know if you have any feedback or questions as there is no build guide.