38 modeli
Fits any barrel <16.2mm OD. Friction fits, elephant's foot will require post processing where barrel mates with muzzle. Reflex sight designed for Nerf mods tactical rails. Here installed on a Nerf Commander elite 2.0 , an economical…
Hello everyone! This is a 3D printable Nerf N-Strike Barrel that I have designed to closely resemble the Nerf Recon/Retaliator Barrel. I’ve always loved the look of the N-Strike line of blasters, and arguably the most emblematic part of…
Use these pieces to convert your Retaliator to use short darts with a 17/32" brass barrel. The back of the pusher uses the o-ring from the old Retaliator breech. The front of it uses an o- ring from a Caliburn or TC pusher (McMaster part…
Hello everyone! This is a 3D printable Nerf N-Strike Barrel that I have designed to resemble a shortened Nerf Recon/Retaliator Barrel. I’ve always loved the look of the N-Strike line of blasters, and arguably the most emblematic part of…
Based upon my previous design , this stock extender will add 100mm to your Nerf Retaliator, as well as a simple tactical rail. The design is now split in half and includes alignment tabs and screw holes that will fit a #4 screw. Both…
Remixed from SomeDingus's brass breech to allow you to load and unload mag without priming the blaster
Based upon Hobbes32's original design , but recreated from scratch, this stock extender will add 100mm to your Nerf Retaliator, as well as an extra tactical rail. Print instructions Print with the narrow end down, using 0.2 mm layers and…
Nerf Retaliator Trigger Spacers These Spacers Shorten the trigger pull distance of the Retaliator. Makes the Trigger Pull more responsive. Attach using Epoxy. Post Printing: there is a .5mm Support wall that should be Cut off before…
Popular muzzle remixed for use with the Worker Retaliator POM short dart drop-in kit. Requires no additional hardware. Notes: Fits any barrel <16.2mm OD. Friction fits, elephant's foot will require post processing where barrel mates with…
If you have a modded Nerf Retaliator and want to install the leftover stock parts into an older Recon CS-6 you will need this spacer/spring guide. This spacer holds the smaller direct plunger Retaliator spring concentric with the plunger…
print the thing, glue the left and right pieces in the respective shell sides of the retaliator/recon, glue the front to the RIGHT SHELL ONLY, put the mag release in the right one, assemble like normal, and it's integrated. Picture shows…
Supports - on building plate + brim Print material - PETG, also tried PLA (Connected parts are a little wiggly, but working perfectly)
Short Dart Mod Kit -- NERF Recon / Retaliator -- Low Hardware Low hardware short dart mod kit for the NERF Recon / Retaliator (just 1 or 2 o-rings and some e-tape needed) I made this remix for my Recon MK2 and it works really well. I…
Modified Gemeneye's original Recon barrel recreation to mount on the front of an Xshot MPP. Used Ghost Manta's shroud as a base for the adapter and to add picatinny rail on top and bottom instead of the original N-strike rails to match…
This is a remix of the upper mount taken from https://www.thingiverse.com/thing:2740551 which is a remix of https://www.thingiverse.com/thing:1212121 That remix added a picatinny rail to the front grip. This remix adds a picatinny rail to…
Adapter to add your favorite sight to a Nerf Retaliator barrel. Print in orientation as imported with supports enabled everywhere. Requires (1) M3 x 12 bolt as well as (1) M3 nylon nut. Open the shell of the Retaliator barrel. Replace…
Print as imported into slicer program with supports. It is also recommended to block supports at all holes; only the picatinny rail, “Rear sling point”, and “Front Align with Sling Point” require supports. Recommended to print with 4-5…
Intent: Slightly extend barrel for a Nerf Retaliator sleeper build. All parts of build fit into a Nerf Retaliator barrel. The parts used in this build are as follows: 40mm length 13mm ID KuryKafe barrel Worker scar-like barrel attachment…
Parts for a Nerf Gun -lufa -Spust -Muszka -Szczerbinka
Części dla Nerf Retaliator: - lufa - muszka - spust
Make sure to cut the plastic tab on the barrel or else the slide will not be able to move back fully. Make sure to use supports when printing or else the handle won't print correctly duh . Category: Toys & Games
works with the Nerf Retaliator v2 compatible with barrel attachments
Adds both a crude sight and a bit more grip area to top prime your higher spring load Retaliator. (tested using 7kg Worker Spring) Inspired by a similar model found here (borrowed some of the geometry) and refined the design. This top…
Objects: This contains two files - Original and Night Style. Both of these retain usability of the ‘OG sight’ that is folding and fitting the general shape. ‘Original’ is contained within single file. It's meant to be a replacement if the…
RET 11027 V1.00 Short Dart Skinny Pusher for Retaliator/Prophecy/Rampage Style PTs. Additional Parts will include: Worker Retaliator/Prophecy Plunger tube (Stock plunger work too) Longstrike Metal Catch and Dart Gate Retaliator sized…
A simple mod for a Nerf Retaliator to make it a lever slide. I printed mine in PETG @ 0.3mm layer height. But i suppose any material and layer height would work.
It annoyed me that the retaliator only had a front sight so I made the rear sight. Enjoy!
Low profile pump kit for the retaliator/recon, using 4-40 threaded rod. I got 6" segments from my local Ace Hardware and cut about 10mm off of one end on each rod. As of my testing it can handle up to 7kg retaliator springs.
Combines the functions of Xero1Tec's "Retaliator Open Pump Kit Project" and ThatBoyJacob's HMI-R lipless xpt retaliator, using less overall hardware, along with changing the aesthetics to closer match a stock look. Just happens to fit and…
Want to convert your Retaliator to shoot short darts? I did. Included: Mag adapter: Redid the body, used the short mag release after modifying ALL of the parts. Bolt: Connects the air tube to barrel. Made it fit pretty tight. Barrel…
To put it on retaliator barrel you have to unscrew the barrel and unscrew the screw holding in the oringinal sight +Another sight for this is coming and then there will be an sight like this for the nerf stryfe and maybe a flywheel Ww2…
Nightingale Cage for FTW Retaliator/Recon. 19.0mm spacing. Replaces the cage part found on the thingiverse page, with (I think) no additional shell cutting. Increases the mass to 42g overall, but never tested if it was quieter than the…
Summary This is a top picatinny rail for a Nerf Retaliator or Recon with the upper priming handle removed. You will need to use the pin that jam door uses and you will need some M4 nuts and bolts. There front end of the blaster tapers…
You might need to adjust some tolerances, I haven't test printed this part in a while.
A simple mod for a Nerf Retaliator to make it a lever slide. I printed mine in PETG @ 0.3mm layer height. But i suppose any material and layer height would work.
To put it on retaliator barrel you have to unscrew the barrel and unscrew the screw holding in the oringinal sight +Another sight for this is coming and then there will be an sight like this for the nerf stryfe and maybe a flywheel Ww2…
Nightingale Cage for FTW Retaliator/Recon. 19.0mm spacing. Replaces the cage part found on the thingiverse page, with (I think) no additional shell cutting. Increases the mass to 42g overall, but never tested if it was quieter than the…
