Nerf Retaliator Stock Extender, Mk. 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based upon my previous design, this stock extender will add 100mm to your Nerf Retaliator, as well as a simple…
- Ocena
- 4 / 5
- Polubienia
- 17
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 1299
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Based upon my previous design, this stock extender will add 100mm to your Nerf Retaliator, as well as a simple tactical rail. The design is now split in half and includes alignment tabs and screw holes that will fit a #4 screw.
Both versions are based upon an original design by Hobbes32.
Print instructions
In addition to the raw .GCODE file, I've included a few .3MF files with different positioning for supports, as well as the individial .STL files.
Print at 0.3 mm. Use a #4 screw in the hole on the side to lock the stock extender in place.