d4Rk cH4RG3r
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super Mario Bros. Charger for iPhone 12 (Pro) w/ case, Air Pods Pro and Apple Watch. I cut everything into pieces, to…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Super Mario Bros. Charger for iPhone 12 (Pro) w/ case, Air Pods Pro and Apple Watch.
I cut everything into pieces, to be able to fit them on the printer and also to avoid needing supports on any visible surfaces. So just glued everything together.
TODO: Bottom plate is not yet there, not sure how I mount it (just glue it?)
Parts
- Apple Watch Charger (e.g. https://www.amazon.de/gp/product/B08MYN8SNZ, actually this one gets really hot and charges rather slowly, so would recommend the Apple original one)
- Power Supply (5V, 30W, maybe 20-25W are also sufficient) (e.g. https://www.amazon.de/gp/product/B07P8HKFLL)
- Socket for power supply (e.g. https://www.amazon.de/gp/product/B009PH1J5Y)
- Qi-Charger (2x, e.g. https://www.amazon.de/gp/product/B079GQVGP3) Just ensure the PCBA is not too large (which is hard to tell here, so maybe better purchase just the electronics with coils from eBay or Ali-Express)
- Soldering iron / some wire for electric installation
- Superglue for putting the things together and fixing the coils etc.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1
Infill:
15%
Filament: FilamentWorld PLA White
Category: DIY