RepRack Hanger for 16mm or 21mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable hanger for 16 or 21mm tubing based on the CNC Kitchen remix of the RepRack system.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 576
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The original RepRack system uses EMT which is hard to find in Denmark in the correct sizes at reasonable prices.
Thankfully CNC Kitchen made a design using IKEA HUGAD and supplied STEP files, however, I found tubing in a local hardware store in 21mm and saw many options in 16mm, so I made two designs for people to use.
The cost of the tubing I found for broom were 1,9EUR, so 3,8EUR for a shelf of 1,4 meters besides printed parts.
The design fits on a MK3 bed when skirt is disabled.
If the rods are loose, secure with a M4 bolt or 3mm heat-set inserts (https://www.prusa3d.com/product/threaded-inserts-m3-standard-100-pcs/ ) (I have no affiliation with the link or CNC Kitchen)
I printed in PLA as its what I had available in black, but I suggest PETG if available.
Feel free to support me @ https://buymeacoffee.com/swagga5aur