RepRack Hanger for 16mm or 21mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable hanger for 16 or 21mm tubing based on the CNC Kitchen remix of the RepRack system.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 97
- Makes
- 1
- Views
- 575
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
The original RepRack system uses EMT which is hard to find in Denmark in the correct sizes at reasonable prices.
Thankfully CNC Kitchen made a design using IKEA HUGAD and supplied STEP files, however, I found tubing in a local hardware store in 21mm and saw many options in 16mm, so I made two designs for people to use.
The cost of the tubing I found for broom were 1,9EUR, so 3,8EUR for a shelf of 1,4 meters besides printed parts.
The design fits on a MK3 bed when skirt is disabled.
If the rods are loose, secure with a M4 bolt or 3mm heat-set inserts (https://www.prusa3d.com/product/threaded-inserts-m3-standard-100-pcs/ ) (I have no affiliation with the link or CNC Kitchen)
I printed in PLA as its what I had available in black, but I suggest PETG if available.
Feel free to support me @ https://buymeacoffee.com/swagga5aur