1 / 1
Rear cassette spacer for SRAM-equipped mountain bike — zdjęcie 1

Rear cassette spacer for SRAM-equipped mountain bike

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 2mm spacer for the rear cassette of an SRAM-equipped mountain bike

Ocena
0 / 5
Polubienia
10
Pobrania
77
Wydruki
0
Wyświetlenia
528
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A 2mm spacer for the rear cassette of an SRAM-equipped mountain bike - on my bike, there are five of them between the smaller cogs in the rear cassette.

The standard item measures exactly 2mm deep.  The 2mm model printed slightly too big (it measured 2.1mm with calipers) on my i3 MK3S+ - I think because of the texture on the top of the model.

As such, I've provided three versions, each differing by 0.05mm.  You may also like to try printing it with ironing.

Tagi