1 / 2
TBS Unify Pro32 HV case for FPV Wings with cutout for heatsink and antenna — zdjęcie 1
1 / 2

TBS Unify Pro32 HV case for FPV Wings with cutout for heatsink and antenna

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple case with a lid to mount the TBS Unify Pro32 HV flush with a Wing surface.

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
301
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple case to mount the TBS Unify Pro32 HV flush with the Wing surface.
I used it to mount the VTX in a Mini Talon wing but other Wings would work too. 
The lid has a little cutout so that a little heatsink can get in the direct airflow and the antenna can poke trough it aswell.

The lid is secured with 4 x M3 Screws, but can also be glued if you don't want to remove it later.

Tagi