1 / 2
TBS Unify Pro32 HV case for FPV Wings with cutout for heatsink and antenna
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple case with a lid to mount the TBS Unify Pro32 HV flush with a Wing surface.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple case to mount the TBS Unify Pro32 HV flush with the Wing surface.
I used it to mount the VTX in a Mini Talon wing but other Wings would work too.
The lid has a little cutout so that a little heatsink can get in the direct airflow and the antenna can poke trough it aswell.
The lid is secured with 4 x M3 Screws, but can also be glued if you don't want to remove it later.