Vase mode Nalgene 1l to cup holder adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A reasonably quick vase mode print to allow for holding a 1l Nalgene bottle in an auto's cup holder
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 124
- Wydruki
- 4
- Wyświetlenia
- 790
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is an adapter to put a Nalgene bottle in a fairly standard car cupholder, Print should be in VASE mode for best results. I started out with a fairly generic design, then got intrigued by a YouTube video regarding using vase mode for faster prints, I decided to play with designing around that.
Originally designed around a Nissan Versa cup holder, I've successfully used it in a Ford Transit, Ford Fusion, and a Ford F450.
I've only tested the 0.6mm nozzle version, and it's doing well. I printed in PETG, and it's stood up well for the last few weeks in the car with outside temperatures above 35C. I changed the parameters in Fusion360 so that it should be printable with a 0.4mm nozzle, but after several samples that are also holding up well, I have no need for more adapters, so haven't bothered to test with the smaller nozzle.
Please share your experience, especially if you choose the 0.4mm nozzle version.
Inspiration video: