W124 AC Condenser Mount Grommet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a direct replacement for MB part number A2019970381 "Grommet: Condenser to stiffening and to front cross…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a direct replacement for MB part number A2019970381 "Grommet: Condenser to stiffening and to front cross member" i.e. the grommet through which the bottom of the AC condenser in a W124 chassis is locked in place.
Things changed from the original:
- fewer round corners to 3D print easier
- slightly more snug fit
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.05
Infill:
Grid 25%
Filament: FFF Flex 88A TPU black
Notes:
This one is not easy to print well, like anything with flexible filaments. However, printing at fine resolution, very slow (<= 20mm/s for all print moves), disabling retraction and using the minimum specified print temperature worked fine in my case. Some post-processing was still required, but nothing to tedious.rnrnPrint top to bottom, with fan on for all layers. Use of glue stick as separator on the print bed is recommended.rnrnIdeally use a softer TPU filament (<= 80A) if your printer can handle it.
Category: Automotive