W124 AC Condenser Mount Grommet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a direct replacement for MB part number A2019970381 "Grommet: Condenser to stiffening and to front cross…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 43
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a direct replacement for MB part number A2019970381 "Grommet: Condenser to stiffening and to front cross member" i.e. the grommet through which the bottom of the AC condenser in a W124 chassis is locked in place.
Things changed from the original:
- fewer round corners to 3D print easier
- slightly more snug fit
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.05
Infill:
Grid 25%
Filament: FFF Flex 88A TPU black
Notes:
This one is not easy to print well, like anything with flexible filaments. However, printing at fine resolution, very slow (<= 20mm/s for all print moves), disabling retraction and using the minimum specified print temperature worked fine in my case. Some post-processing was still required, but nothing to tedious.rnrnPrint top to bottom, with fan on for all layers. Use of glue stick as separator on the print bed is recommended.rnrnIdeally use a softer TPU filament (<= 80A) if your printer can handle it.
Category: Automotive