MagSafe Charger Station for Audi A6/A7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A MagSafe charging station for the center console of an Audi A6/A7
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 2912
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
My new car didn't have a wireless charger unit in the center console. The center console had two USB-C ports, so I designed this MagSafe charger insert. It has dedicated cable routing and a cable holder to be used with zip ties (check out the photos for more detail). The space underneath the station allows you to put other things, such as documents, pencils, etc.. and also access the second port (if you want to charge another phone.
I only tested it with iPhone 12 Pro. The Max/Plus versions won't work. The iPhone 13 versions have a bigger camera bump, I don't know if it will fit for them, let me know in the comments.
The MagSafe circle is 56mm, and is exceptionally tight (the original MagSafe charger is 55.5mm. The magnets are powerful; hence, pulling out the phone sometimes would pull the MagSafe charger as well. Making it highly tight prevents it. You need to create some pressure, but it will not break anything.
Please print with supports and put the supports underneath the model.
Print in PETG with 20% Infill. PLA will cause deformation in warm climates, so don't use PLA.
Bonus: I wrapped my model with a self-adhesive fabric. That way it matches the interior of your center console.