Tool Inlet with labels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptable tool inlet for the Wera series "Kraftform Kompakt VDE“.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is the inlet for the holder “Wera Kraftform Kompakt VDE", which I also constructed. This inlet is freely customizable only the individual parts must be combined. You can print the symbols and labels which you need and insert them. I use a normal glue. The files are available as STEP and as 3mf.
This insert has no symbols or labels. Instead, there is another insert that can be equipped accordingly.
I printed the carrier with PLA+ from Eryone with 15% infill. Support is not needed.
My prints are with two colours. The base I print with 0.2mm red and the symbols / letters with 0.1mm white layer height.
- The layer height for changing the colour is at 1.9mm for the labels.
- The layer height for changing the colour is at 2.6mm for the symbols. The symbols need build plate support!
I have included an example with 14 squares as a finished print object.
Inletholder:
https://www.printables.com/model/228466-wera-kraftform-kompakt-vde-holder