Voron SexBolt Z End Stop Modified
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modifications To Eliminate Interference With Rear Bed Mount And Increase Height For Taller Bed
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 2125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In the video above, I show the issues that I had with the Voron SexBolt Z end stop and how I resolved them with these modifications.
Namely, I had interference with the rear print bed mount. Also, due to the print bed insulation I installed, I had to increase the height of the spacers under the print bed. Now the SexBolt end stop would not reach high enough above the print bed and therefore I created the spacer insert to push the button higher.
Please support my work and my channel by visiting my website:
► https://www.embracemaking.com