1 / 7
Grogu Coaster
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grogu coaster
- Ocena
- 5 / 5
- Polubienia
- 97
- Pobrania
- 438
- Wydruki
- 6
- Wyświetlenia
- 1515
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 6) (Komentarze: 7)Remiksy (0)Kolekcje (125)Powiązane
10cm in diameter and 3mm thickness (bottom section 1mm, Grogu 1mm and outer ring 1mm)
I printed with 0.4 and 0.8 nozzles
- 0.8 nozzle: layer height at 0.5mm ends up being 6 layers, and 0.8 line thickness. If you want multicolored coaster, change color for Grogu at layer 3 and for outer ring at layer 5
- 0.4 nozzle: layer height at 0.25, line thickness at 0.5. Ends up being 12 layers. If you want multicolored coaster, change color for Grogu at layer 5 and for outer ring at layer 9
I also added a file for the one without runoff, also 3mm thick
Coaster holder bottom part is 1mm thick and the wall is 0.8mm thick, 25mm height
- 0.8 nozzle: layer height at 0.5mm and line thickness at 0.8mm
- 0.4 nozzle: layer height at 0.25mm and line thickness at 0.4mm