1 / 7
Grogu Coaster
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grogu coaster
- Rating
- 5 / 5
- Likes
- 96
- Downloads
- 438
- Makes
- 6
- Views
- 1,515
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
10cm in diameter and 3mm thickness (bottom section 1mm, Grogu 1mm and outer ring 1mm)
I printed with 0.4 and 0.8 nozzles
- 0.8 nozzle: layer height at 0.5mm ends up being 6 layers, and 0.8 line thickness. If you want multicolored coaster, change color for Grogu at layer 3 and for outer ring at layer 5
- 0.4 nozzle: layer height at 0.25, line thickness at 0.5. Ends up being 12 layers. If you want multicolored coaster, change color for Grogu at layer 5 and for outer ring at layer 9
I also added a file for the one without runoff, also 3mm thick
Coaster holder bottom part is 1mm thick and the wall is 0.8mm thick, 25mm height
- 0.8 nozzle: layer height at 0.5mm and line thickness at 0.8mm
- 0.4 nozzle: layer height at 0.25mm and line thickness at 0.4mm