Bogg Bag Charm Skull and Crossbones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skull & crossbones charm to personalize your Bogg bag. Screws securely through any of the bag's holes.
- Ocena
- 0 / 5
- Polubienia
- 59
- Pobrania
- 452
- Wydruki
- 1
- Wyświetlenia
- 1320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this simple skull & crossbones charm to add some personality to your Bogg bag. After having lost several of these charm-type decorations on both Bogg bags as well as on Crocs, I designed this charm to stay securely attached via a threaded screw/bolt mechanism that passes through the bag's holes. The bolt itself has a large (US Quarter-sized) head to prevent the charm from pulling out of the hole once attached.
Printed without supports, threaded bits pointing up. I was able to print this very quickly and successfully using a 0.28mm layer height and printing at 70mm/s on my Ender 3 v2. I used Cotton White PolyTerra PLA for the print shown in the photo.