Threaded rod remix to join "Screw Clamp" and "Articulating Mount" and "Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Mashed" two parts together in the slicer to be able to join pieces from both of the original models :)
- Ocena
- 4,5 / 5
- Polubienia
- 22
- Pobrania
- 62
- Wydruki
- 2
- Wyświetlenia
- 979
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Added in the slicer the “threaded-rod-120mm.stl” and “mmlink.stl” parts of both projects (with some negative modifiers) to get a single part that allows mounting the screw clamp on the articulated joints. You still should get the parts from the original models to be able to build what is shown in the picture.
Due to the size of the parts you can only mount the “nuts” from one side of the screw.
I provide the 3mf and gcode for the prusa mini folowing a request in a comment. Hope you guys find it useful :)