Threaded rod remix to join "Screw Clamp" and "Articulating Mount" and "Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2"
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.82 – €2.23 net (excluding VAT)
For file: threaded-rod-120mm_0.2mm_PLA_MINI_2h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.03 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 2.33 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
"Mashed" two parts together in the slicer to be able to join pieces from both of the original models :)
- Rating
- 4.5 / 5
- Likes
- 22
- Downloads
- 62
- Makes
- 2
- Views
- 980
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Added in the slicer the “threaded-rod-120mm.stl” and “mmlink.stl” parts of both projects (with some negative modifiers) to get a single part that allows mounting the screw clamp on the articulated joints. You still should get the parts from the original models to be able to build what is shown in the picture.
Due to the size of the parts you can only mount the “nuts” from one side of the screw.
I provide the 3mf and gcode for the prusa mini folowing a request in a comment. Hope you guys find it useful :)