Under shelf storage for Mac Keyboard or Trackpad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to store my Mac Keyboard and Trackpad off the work surface when not in use. The underside of the shelf is not…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 78
- Wydruki
- 2
- Wyświetlenia
- 450
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to store my Mac Keyboard and Trackpad off the work surface when not in use. The underside of the shelf is not used for anything, so I designed these parts to be printed in pairs and stuck on using four 3M Command strips. Two strips to each.
They have a stopper at the back so you don't push the keyboard all the way through.
Mount the 1st one and then before removing the strips on the 2nd one, dry fit the part and mark the edge of the 2nd bracket on the face of the shelf with a pencil. This way you don't have to fight dropping the keyboard.
The design also allows the risers i printed to stay attached the to the keyboard when slid in.
If you like this and print some please post a picture.
Enjoy!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Prusa Basic PLA Galaxy Silver
Category: Computer