Micro Extruder movement indicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't like the larger designs for the inidicators and wanted something that did the job but in a discreet way.…
- Ocena
- 4,667 / 5
- Polubienia
- 14
- Pobrania
- 88
- Wydruki
- 3
- Wyświetlenia
- 364
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't like the larger designs for the inidicators and wanted something that did the job but in a discreet way.
You'll need a single 8x3mm Neodymium Magnet and some super glue.
On the top surface there is a 0.5mm raised piece. I did this to enable easy removal and ensure the indicator was not flush against the motor body. Glue the magnet to this top piece with a small (!) drop of superglue.
Hope you enjoy. Please post a picture if you print one.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
15%
Filament: Makerbot PLA Neon Green
Notes:
Printed with Brim on smooth sheet. Approx 6 mins print time.
Category: 3D Printer Accessories