TBS Source One XT60 Mount with or without Caddx Vista Antenna holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello, This is an XT60 holder for an TBS Source One Frame with or without the original Caddx Vista Antenna. I designt…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 184
- Wydruki
- 0
- Wyświetlenia
- 1186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello,
This is an XT60 holder for an TBS Source One Frame with or without the original Caddx Vista Antenna. I designt his because i often got the cable from my XT60 plug into my props. First i used the original Caddx Vista Antennamount but because there is no angle to it i integrated it to my design. The hole for the antenna is 4mm diameter so the fit it quite stiff. you my have to drill it a bit.
Feel free to ask if you have any questions.
Print Settings
Printer Brand:
TEVO
Printer:
Delta (Little Monster)
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100
Filament: Sainsmart TPU Blue
Category: R/C Vehicles