The Solar System coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
90mm (3.54" for US folk) of usable solar system as a coaster.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 522
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
90mm (3.54" for US folk) of usable solar system as a coaster. According to my education, i have included Pluto because that's what I was taught in grade school.
For added flair, you can add a filament change under 2mm from the top to highlight the planets and also the outline of the sun.
I do not recommend printing larger than a .4mm nozzle as you would lose detail in Uranus. That would be highly unfortunate as a detailed Uranus is very desirable to keep Uranus looking smooth, complete, and whole.
I printed my coaster with a .4mm nozzle at .1mm layer height 15% infill and two perimeters. I also changed the top infill layer pattern to Archimedean Chords which resulted in a lovely circular accent. Make sure your filament is properly dried for these alternative patterns or you can struggle against the stringing.
For those who want to add color through filament changes:
the sun's rays finish at 3.85mm
the planet negative space divisions finish at 4.25mm
the outlines of the planets (including saturn and Uranus' rings) finish at 6.25mm
keep in mind the top layer includes the Sun outline for drink stability, i can upload one without that if people want it.