Modified Voron V2.4r2 and Trident Fan Grills
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easier to print fan grills without the outer edge profile on the first layer
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 79
- Wydruki
- 3
- Wyświetlenia
- 721
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
After numerous attempts to print these fan housings without the second layer stringing off the print due to the edge profile I gave up and removed the edge. I don't really see any need for such a small contour and now I can print it without issues (sorry Steve).
Just replace these with the originals and print according to the voron instructions. I didn't have as many issues with the retainer but I modded it anyway, Its an optional mod.
I know this is a Voron Trident feature that was ported over to the Voron V2.4r2, so it should be Trident compatible.