Gas cooker folding base (for 100g gas cartridge)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,94 € – 1,15 € netto (bez VAT)
Dla pliku: cooker_base-slat_0.6n_0.2mm_PETG_MINI_1h0m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,04 € netto (środek widełek).
- Masa podana przez autora
- 15 g
- Czas druku podany przez autora
- 1 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Use this base to stabilise your gas cooker
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print 5 pieces of slats out in PETG or higher temperature resistant material (there are 5 on the plate in the .stl) and clip them together. It should be pretty obvious how they go together. Look at the photos if you can't figure it out. For ease of design and printing I have designed the slats to be all the same, but the last one needs to have the tip of the clip bit cut off to unfold properly. Use pliers or side cutters to do this.
unfold the base and clip the slats individually on the folded edge of the cartridge. Don't just place it on the base and press down, this doesn't work (and will probably break it). To disassemble unclip them individually and fold the base.
While cooking, make sure that the base can't get too hot, or it will go soft and fall over. All the common precautions apply. Don't leave it unattended. If the pot overboils and drips on the slats it can fall over. The design uses 5 feet because they offer a level of redundancy, but that doesn't mean it's absolutely safe.