1 / 4
C920 Webcam Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Really simple mount I made for my Ender 5 Plus. It mounts directly on the extrusion using t-nuts.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 209
- Wydruki
- 1
- Wyświetlenia
- 1964
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (43)Powiązane
Really simple mount I made for my Ender 5 Plus. It mounts directly on the extrusion using t-nuts. This fits the C920 webcam, but could possibly work for others. The holes in the front are 5mm. I made 5 holes for M5x10 hex bolts with M5 t-nuts for the extrusion. The hole in where the camera is mounted is 6mm, which is the size of the bolt for the bottom of the C920.