Liczymy pasujące modele…
This is my remix of RedKB's front mount for the C920. I had previously been using the Pi camera with Sneaks articulating mount and really liked it. When I upgraded to the C920 I didn't like the big bulky mount so I used Nat's mount to…
Wydruk około 5,53 €–6,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Camera mount for IKEA LACK with screw for UNC 1/4". This fits all cameras with a UNC 1/4" thread, e.g. Logitech C920, Lenovo 500 FHD or similar. The camera holder includes the following components: - Clamp with screw for attachment to the…
Wydruk około 7,44 €–9,09 € nettoWstępna wycena jednego wariantu
Mounts onto any of the threaded holes in the upper frame using M3 hardware. Follow the C920 disassembly guide here . You will also need to print this mount , originally for Voron. Not posting it as a file here to avoid any confusion as to…
Designed a corner mount bracket to fit the ¼"-20 tripod mount screw for a Logitech C920 (should fit pretty much ANY camera with a normal tripod mount screw). Has attachments for the bottom of the extrusion or the inside. Print with…
Print material: PETG recommended Print settings: CR10-SE C920 Mount: 5 Perimeter walls, 4 bottom layers, 4 top layers, 25% infill Camera Antivibration top clamp: 9 Perimeter walls, 4 bottom layers, 4 top layers, 100% infill…
A longer arm to observe from a different angle. printed in two parts to minimise the need for supports. joined with m3 bolts and nuts.
Print material: PETG recommended Print settings: CR10-SE C920 Mount: 5 Perimeter walls, 4 bottom layers, 4 top layers, 25% infill Camera Antivibration top clamp: 9 Perimeter walls, 4 bottom layers, 4 top layers, 100% infill…
This is a remix of the Billnis remix which is based on the EunchanPark's original model from 2020. I had to make the remix because none of the Amazon links work anymore and my best guess for an available LED ring did not fit the model. I…
Have a spare Logitech C920 camera and want a printer camera for your Prusawire? This 3-part print replaces one of the bearing clips with a camera mount. This is compatible with Prusawire Beta 1 and Release 1, but you should reprint the…
EDIT: New updated version here. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I printed this using Elegoo PLA, using the 0.20mm Standard 0.4 nozzle profile…
Motivation I wanted a nice looking and hidden camera mount for my C920 . So I made my own. Parts and BOM You'll need the camera and 2x m3 8mm or (2x 10mm?) BHCS screws and 2x m3 T-nuts. Printing Print as provided. Please use support for…
A multi part printable shell casing for a Logitech C920 / C930 Webcam, removed from the manufacturer's shell. NOTE: I've updated the files: Removed the mount i previously designed to be printed, and updated the design to implement the…
I designed my own webcam mount for my Ender 3 S1 Pro. I wanted the cam drive with the Z-Axis. You can use the holes for different positions and cams. I printed it in black Petg and its worked perferct for me . Hope you enjoy. Today…
I printed this with full walls, fits perfectly and uses the screws from the body of the logitech to fix mount. Designed 2 years ago and still holding perfectly.
DO NOT TRY TO PRINT THIS WITH PLA SINCE IT WILL MELT!! If you have ABS at your disposal: use that. Otherwise PETG will do for prints below 80°C bed temp. This remix adjusts the form to fit the angular Y-Carriage on the MK3S, adjusts…
You can use it for a Logitech C920s webcam. I added a little border in case you want to place other stuff on the arm / shelf. If you require additional grip, apply a strip of thin foam rubber tape to the inside. To attach it, begin with…
Printed in PETG Overture Stary Blue. I used supports but probably didn't need to.
This is a wider, dual mounting solution that centralises the position of the camera for better top down viewing of your printer.
This is a 2-piece mount for a Logitech C920 or C930 webcam, allowing it to mount to either 2020 or 3030 extrusion at the top of your printer. To use this mount, you will need to disassemble your webcam until the point where you remove the…
No axis disassembly is required. The arm fits nicely on the end of X-axis. UPDATE V2: Vertical version! ( I need to improve light now 😅) Since my printer is sideways in my closet, the v1 was a bit impractical and I kept bumping into it.…
As the original model author, I was not satisfied with the aesthetics of other mounts. Her model really fits nicely with the curves of the camera, but in my case, I needed the mount from the bottom and not from the back. Print like the…
This is a Logitech C920 Webcam Mount for a Prusa XL printer. The mount is primarily designed to have the camera in the right-rear corner of the printer since that's the clearest view of the printheads while printing. Since the mount uses…
The Logitech C920 Case 2020 Extrusion worked very well for my C930e. I was afraid to let unprotected camera lens protrude like that, so I designed a simple pseudo-pyramid that protects them - now a stray cable won't catch it, but rather…
Remixed the original to accommodate a 90mm LED ring light, as well as allow me to still use the privacy shutter I already had installed on my C920. Created some diffusers of varying thicknesses to make it less blinding, printed in…
After trying different ways to mount my Logitech c920 onto my Ender 3, I decided I wanted a way to mount the camera off the bed or Y axis. I came across @SCHEMENKE's design for an iPhone mount and thought it was a brilliant design. So,…
This is a mount for the Logitech C920 HD Pro webcam that allows you to mount it to a wall. The camera can be easily rotated. Aside from the screws needed to fix it to a wall no other hardware is needed. The holes for the screws are 5mm…
The mount is fixed to the z motor mount which allows the nozzle to be seen regardless of the height of the printed model.
This is a custom matte box designed for the Logitech C920/C922/C930 webcam, remixed to include a “hook” that securely attaches the matte box to the webcam. The hook ensures a snug fit without requiring any adhesives or additional support,…
Remix of the ‘Larger slide cover’ by RasmusB, which is based on https://www.printables.com/model/411917-logitech-c922-webcam-cover-slide-to by codysechelski Remix differences from RasmusB's version Removed the gap between the body/button…
Simple corner mount for Logitech C920 webcam. Printed with Inland PETG+ at .20mm layer height.
This mount is meant to be glued or attached with an elastic rubber band. It allows screwing a lens to the camera. This is in particular useful to mount a fish-eye lens to have a bigger field of view for 3d-printer cameras. Here is the…
Webcam block mount meant to use 2x M3x10mm screws and blind t-nuts in 2020 extrusion with Logitech C920 webcam removed from enclosure to just raw PCB. Has pocket / space for a small heatsink to be used on the back of the main processor…
2025-10-16 If you don't have (or like or use) heatset inserts, there is a version that will take an M3 x 10mm screw that does NOT need the insert. ------------------------------------ This is a camera mount for the Anycubic Kobra 3. I…
This is a mount based off of the following Thingiverse models: HeyVye's modular mounting system This c920 bracket This 2020/3030 extrusion bracket You will need to disassemble your c920. Perform steps 1-5 of the iFixIt C920 teardown ,…
A big thumbscrew is better for my old fingers. I remixed the C930e horizontal mount remix to work with my C920s and provide clearance for a thumbscrew from yet another camera mount .
I wanted to mount my old Logitech C920 in my new Core One. I remixed together a corner mount for the Core One and the really excellently-modeled C930-to-gopro adapter by ochm to build this mount. You'll need to take apart your camera a…
I printed at 40% infill for strength. 20 minute print time. No support needed. 0.2mm layer height.
I mounted the mount upside down compared to the original design, so wanted the cam mounted further out from the bed, and wanted the mounting holes for the gantry to be part of the print rather than requiring drilling. This isn't really a…
This is to mount C920 in better angle if you come from something like this: https://www.prusaprinters.org/prints/38920-c920-camera-mount-mk2-mk3smmu2 and don't have the bottom clip :D Remix of two models here: For Arm:…
An alternative part holder for @medyk3D 's Logitech C920 camera stand. Original project https://www.printables.com/model/18058-logitech-c920-camera-stand
Requires six 6x2mm magnets Refer to https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077 to disassemble webcam to replace with mount In order to guide the USB cable from the top down you will need to disassemble the frame…
This is remix of few great project - I just adapted that to my personal needs Camera mount system by FedorSosnin - Thingiverse https://www.prusaprinters.org/prints/340 by Sneaks I took some of these parts from these projects above and…
This is similar to some other cam mounts for C920, but with the camera further out to the right of the printer, to avoid the carriage from hitting the camera (happens with some fanmod parts) and to give better focus when the nozzle prints…
Originally made for Prusa i3, mk3, mk3s but added support block which allow this mount to be mounted on Ender's 3 Y axis belt tensioner. Disclaimer: Original model for Prusa printers is not my design. Author's profile:…
Fix for the hole (screw from printer to part) M3 screw ¼ Inch Screw for the camera (can print it)
I printed it with Prusa Jet Plack PLA. For fixing you need a transparent double-sided tape.
*Update 25/02/2022 - Added a v2 that is much less tight and appropriately form fitting to C920 This C920 mount was created/remixed to fit comfortably in v2 prusa enclosure. I personally had a c920 available for use but could not find any…
Camera housing for C920 and 3030 extrusions (20° inclination) No supports needed Additional hardware: ¼ inch camera screw https://www.amazon.nl/-/en/SMALLRIG-Screw-D-ring-Mounting-Release/dp/B01N1MYQX0 https://www.amazon.nl/dp/B0CP5R235B…
Logitech C920 – camera mount under the monitor. It's best to attach it using double-sided tape. I used this video to see how to disassemble the camera and remove the original mount: https://www.youtube.com/watch?v=q0wWCd5nmfU The hinges…
Bigger gap to insert USB connector through body cam
A longer arm to observe from a different angle. printed in two parts to minimise the need for supports. joined with m3 bolts and nuts.
This is a Logitech C920 webcam mount for the Ender 3 S1/S1 Pro printers. It slides over the X Axis belt tensioner. Use the top clip clamp to keep the camera resistant to vibration. The Camera angle optimized for the field of view of this…
Side mount for the camera that uses enclosure screw holes, for the Logitech C920. No camera modification required.
Ich wollte eine einfache Lösung, um mich mithilfe meiner externen Webcam beim Schlagzeugspielen aufzuzeichnen, ohne dass dabei das Kabel Weg oder im Bild hängt. Hierfür habe ich die beiden Modelle konstruiert. Die Webcam lässt sich…
Follow the 1st 5 steps of this guide to get rid of the factory foot. Hold the old foot in your hand and bask in its extreme overengineering, set it aside, and clip on your new printed mount. Print the bracket from the original project ,…
My extruder crashes into the original model, so I mirrored it so the bracket holds the camera far enough away from the build zone to avoid said crashing. Nothin' crazy here. Hang the webcam upside down, zip-tie it so it doesn't unfold,…
This is a mount with standard 1/4-20 tripod screw hole to replace the bulky/heavy mounting base on the Logitech C920 webcam. There are two versions of the mount: a low profile version which sits approximately flush with the bottom of the…
This is a remix of the Billnis remix which is based on the EunchanPark's original model from 2020. I had to make the remix because none of the Amazon links work anymore and my best guess for an available LED ring did not fit the model. I…
Mount for a Logitech C920 or C930 webcam to attach to an IKEA Bror cabinet. Useful for filming prints or work.
My use case for this was to complete the build from Tnever's design, hopefully they share the missing files one day! https://www.printables.com/model/247829-logitech-c920-camera-monitor-mount-with-swivel/ I printed it in Prusament PETG…
To attach a Logitech C920 webcam to my Ratrig, I wanted a solution that was as discreet as possible and provided a good overview of the print bed. So I designed this camera mount based on the camera housing from Stadi . The cable for the…
Have a spare Logitech C920 camera and want a printer camera for your Prusawire? This 3-part print replaces one of the bearing clips with a camera mount. This is compatible with Prusawire Beta 1 and Release 1, but you should reprint the…
Goal is pretty self explanatory. It prints in two parts, the holder needs supports but it's an easy print, the base you can get away without if you want. I left some of the supports on because I thought it looked quite good (just normal…
Made bracket for Cisco Catalyst C9200CX to be able to mount it to 19" rack without buying original one. Print with PETG at least, print oriented as-is. I used 5 perimiters, Honeycomb infill 20%, snug supports.
Mount for holding a Logitech C920 camera on the Prusa XL rails. Additionally, two M4 T-nuts for the rails and two M4x25 screws are required. The model is compatible with the Voxel3D enclosure.
Logitech C920 Kamerahalter für Prusa Core One Kamerahalter für die Eckmontage einer Logitech C920 Webcam am Prusa Core One Drucker. Ideal für Timelapse-Videos und Drucküberwachung. Montage: 2x M3 Ruthex Einschmelzhülsen 2x M3 x 10…
Made it twice as thick that way the usb wire wouldn't interfere with the camera position
This mount allows a Logitech C920 webcam to be attached to the excellent top hat canopy by PrintSomething https://www.printables.com/model/568090-voron-24-trident-canopy - centre section It uses the replacement webcam adapter made by…
This print is designed to allow mounting a Logitech C920 to the PrusaBox rail, without having to take off the mount that comes supplied with the camera. The original mount just slides into a square housing to hold the camera. The housing…
A compact mount for Logitech C920 webcam. You will need a 1/4-20 UNC screw (tripod mount screw) to mount on this holder. The holder uses two screw holes in the front left steel pillar. Added 3 photos of what the C920 sees when mounted.…
This is a basic Logitech camera 'hanger' for the Flashforge Adventurer 5M (AD5M). Designed to be hung from the front-top rail and allow a straight-on view of the print. As with the original model, print with 15% infill and tree supports.
Logitech C920 corner holder for 2020 extrusion on 3D printer etc Sits on top corner of my ZeroG Nebula build. Needs 2 t-nuts and 2 M3x8mm screws Needs to be printed with bedsupport
EDIT: New updated version here. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I printed this using Elegoo PLA, using the 0.20mm Standard 0.4 nozzle profile…
Left X-Axis Friction Fit Mount I put together to mount my Logitech C920 on the Ender 3 S1. You should be able to use any webcam that has a standard 1/4" tripod mounting screw insert. You will need to print out a 1/4" screw to mount your…
Settings: I printed this with Bambu Labs PLA Basic, using the 0.20mm Standard 0.4 nozzle profile in Elegoo Slicer. Support Enabled Type: Tree (auto) Style: Tree Slim I recommend printing it Horizontal rather than Vertical to reduce print…
This is a changed design to my original vertical mount for a Logitech C920 which allows mounting the camera without removing the factory mount from the camera. The original mount was vertical which works ok, but it can vibrate a bit when…
Remixed for 1/4inch x 1/16inch magnets
Easy to print, easy to mount, easy to use and of course with an awesome look - like all G.design’s prints. The design is compliant so you can still adjust your belt tension. You don’t need to disassemble your webcam - just mount it on the…
I wanted to hold a led strip to provide ligthning for my webcam and I didnt want a big ring light. I came up with the idea of using a V-shaped led strip to provide a good ligthning and had to figure a way to mount it on my screen/webcam.…
Eine einfache Halterung für die Logitech C920 Webcam am linken Z-Motor des Prusa i3 MK3S. Zum Anschrauben an den Motor können die Originalschrauben verwendet werden. Die Schraube mit der die Webcam von unten an den Halter geschraubt wird,…
Motivation I wanted a nice looking and hidden camera mount for my C920 . So I made my own. Parts and BOM You'll need the camera and 2x m3 8mm or (2x 10mm?) BHCS screws and 2x m3 T-nuts. Printing Print as provided. Please use support for…
As the monitor bezel is to thin for the c920 i designed a spacer which raises the webcam. Probably useable for many Dell monitors and other webcams. Created with Solidworks Printquality doesn't really matter, as the part is almost not…
A multi part printable shell casing for a Logitech C920 / C930 Webcam, removed from the manufacturer's shell. NOTE: I've updated the files: Removed the mount i previously designed to be printed, and updated the design to implement the…
Since i wanted a more sturdy mount for the Logi C920 i made my own version. The back is open so that heat can dissipate better. Slots for the wire is also made so that you can nicely route the cable out the back, through the feet and into…
A Logitech C920 web-cam mount for easy QR-code scanning. Hold the QR-code on the plate in front of the camera and the camera will auto focus on the QR-code. The camera field of view corresponds to the size of the plate. The mounting box…
Variation for 6x3 Magnets. Fits Core One and Core One L
A simple privacy cover for the Logitech C920 webcam. Design features: Clamps onto the webcam, ensuring it stays on when opening and closing the cover. The cover can stay open without requiring any friction or clamping force. Assembly is…
After attempting a few prints of the simple camera mount i kept having the same problem with the outer braces that clamped onto the Y axis snapping. Instead of printing this in 100% infill i opted to increase the width and size of the…
This is a ball-mount based articulating arm to use with the the Logitech C920 camera. Current version features an 80mm long arm and a base mount that uses 2 4mm wood screws. More to come in the future please suggest more…
Wir haben Oberflächentemperaturen von über 60°C im Sommer auf den Kisten und das Management läuft mit Tempwarunungen voll. Wir haben einen beQuiet 80mm Lüfter aufgeklemmt und mit einem USB Kabel verlötet. Der USB-A Port am Switch liefert…
The low profile mount I remixed this from was great but I wanted a corner mount. This seemed like a simple solution and seems to have stood up pretty well so far. Printed in ASA for me but I'm sure ABS would be fine. I used the standard…
This isn't so much a remix as it is an inspired recreation. I added a 20° angle to it to allow the camera to use the vertical axis of the frame much more efficiently. This version is also much closer to the actual dimensions of the webcam…
So, are you in the extremely specific situation where you have a triple-monitor mount with an exposed post and have no spot to put your Logitech C920? Well have I got an extremely specific solution for you! Print instructions: I designed…
This is a simple Logitech C920 camera mount. You need to remove original holder from your camera, so you will lose the warranty. Base can be glued or screwed to your table so it can be placed really firmly to the ground. Camera is press…
