Logitech C920 HD Pro Webcam Mount for LACK Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the C920 to hang UPSIDE DOWN from the ceiling of the LACK enclosure.
- Ocena
- 4,5 / 5
- Polubienia
- 37
- Pobrania
- 190
- Wydruki
- 1
- Wyświetlenia
- 1248
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I found that when deciding on a camera mount, I didn't really need the ability to rotate my camera left and right, but if I was printing something tall, I'd just need to be able to tilt my camera up.
So I came up with this simple solution.
KEEP IN MIND, this solution is not left/right adjustable after it's installed. The camera has a wide angle, so it shouldn't matter.
You'll also need to go into Octoprint and flip the image vertically AND horizontally so it doesn't come back a mirror image. I found this is easiest when done in the camera settings provided by the Octolapse plugin, and the plugin doesn't need to be enabled to flip the image.
No supports.
Print with or without a brim, the model is small.
Print it standing on end.