C920 Extrusion Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a 2-piece mount for a Logitech C920 or C930 webcam, allowing it to mount to either 2020 or 3030 extrusion at the top of your printer. To use this mount, you will need to disassemble your webcam until the point where you remove the factory mount. Then, using pliers, gently pull the metal brackets (and their white plastic bushings) from the original mount. Insert the metal brackets and bushings into the printed parts, and reassemble the webcam.
Below is a great guide that covers webcam disassembly: https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077
If you are mounting to 2020 extrusion, you will need:
- 2x M3x8mm SHCS
- 2x M3 T-nuts
If you are mounting to 3030 extrusion, you will need:
- 2x M6x12mm SHCS
- 2x M6 T-nuts
Disclaimer: I have not printed and installed the 2020 version (yet), but if you do, please let me know how it goes and if any changes need to be made!