Liczymy pasujące modele…
A holder for a Logitech C920/C930E webcam without the heavy base for a Prusa i3 MK3/MK3S X-axis nema 17-motor. Uses the original hinge to keep tilt functionality. Last picture is from the webcam. It requires disassembly of the camera, but…
Requires six 6x2mm magnets Refer to https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077 to disassemble webcam to replace with mount In order to guide the USB cable from the top down you will need to disassemble the frame…
I really like the original design of this for the Logitech C920. The hinge works great and feels solid. Unfortunately my webcam, the Logitech C930e, is ever so slightly different. It could have fit well enough, but I can't leave well…
I wanted to mount my old Logitech C920 in my new Core One. I remixed together a corner mount for the Core One and the really excellently-modeled C930-to-gopro adapter by ochm to build this mount. You'll need to take apart your camera a…
This adapter screws onto a microphone stand and holds a Logitech C920, C922, or C930 webcam by snapping the stand portion of the webcam into this adapter. The webcam can then be angled up or down with a much larger range than if it were…
I found the original model to be too long for my liking. I needed to use a custom gcode to move the bed out or move the printer head out of the way which slowed my prints. This version has a shorter bar which allows the camera to be…
If you have old smartphone mobile lenses and want to use them to change up or enhance your existing webcam, these clip in place adapters will allow any bayonet-style lens to mount firmly against the webcam. Add barrel distortion,…
This is just the adapter to make the G920/G930 camera work with the mounting arm by RJay (https://www.prusaprinters.org/prints/31047-mounting-bracket-for-playstation-eye-camera). This adapter keeps the hinge functionality of the original…
Logitech C920/C930E Prusa i3 MK3/MK3S X-axis holder
As an Remix from @ebeeche_158366 camera mount, I don't want toremove the foot of my Logitech C930. So I remix the camera arm, that it can hold a camera with tripod hole. Supports are necessary for one side. Please check the original…
8-17-2020- I added V2 which has a stablizing leg that minimized vibration and shaking. I wanted to this stick out a bit further from my print bed than Magnus's original so I extended the arm I also made an access hole so you can use a…
Model is designed to fit perfectly behind my "Original Prusa Enlosure - Raspberry Pi Mount with 7" Display" model. For the ball joint, you need: 2x M3 nut 1x M3 16 mm Allen head 1x M3 10 mm Allen head I am using a Logitech C930, it has a…
This is a custom matte box designed for the Logitech C920/C922/C930 webcam, remixed to include a “hook” that securely attaches the matte box to the webcam. The hook ensures a snug fit without requiring any adhesives or additional support,…
Mount I designed for my RatRig V-Core 1.3 to hold a Logitech C920 webcam, angled downwards at 20 degrees so it can see the entire bed. This fits 2020 extrusion and mounts with M5 T-nuts. There s a clearance hole for a standard ¼" tripod…
Slim vertical mount for Logitech C920/C930 webcam, 2020 aluminum profile
I remixed the third hinge so that I can mount my Logitech C930e, it has a horizontal hole on it. here is the original https://www.prusaprinters.org/prints/36581-webcam-mount-for-prusa-mini
Only change to this already excellent camera mount was to make it 1cm longer, to be able to see around these lights... https://www.printables.com/model/18921-yapl-yet-another-prusa-light
Simple Logitech Webcam C930e mount for PrintClosure Uses original M3 hole in the corner of the enclosure. Additional: ¼ inch camera screw ( Like this one )
Logitech C930e Webcam Halterung für das IKEA Lack Gehäuse. Logitec Webcam C930e mount for the IKEA Lack enclosure. Category: 3D Printer Accessories
The C920 mount was loose on my C930E fixed it. Use this rail to mount to PrusaBox. https://www.printables.com/model/383900-prusa-box-web-cam-rail-v2 Get other parts from orig post at:…
Simple stand for Logitech c930e to get it up from the desk.
Logitech C920/930 x-axis mount. This mount replaces the X-axis cover. make sure to mount the limit switch inside the cover. Uses all original hardware, you will need a screw to mount the camera, I just used a printable one I found on…
Just a longer version to allow for double part cooling fans. Took the original file and added a big bar to extend it. Image is with the camera zoomed in a little. Category: 3D Printer Accessories
This is just a remix to support a flat LED halo ring aka angel eye with a diameter of 75mm. See remix source for further details. The groove for the ring has a width of 4.5mm and a depth of 2.5mm. Print Settings Printer Brand: Anycubic…
Variation for 6x3 Magnets. Fits Core One and Core One L
I am using octoprint with my prusa 2.5s so i have been doing a few timelapse videos of prints , I have a few of these C930e cameras laying around so made a clip on lens holder to hold a standard 37mm screw on filter to reduce glare with a…
A multi part printable shell casing for a Logitech C920 / C930 Webcam, removed from the manufacturer's shell. NOTE: I've updated the files: Removed the mount i previously designed to be printed, and updated the design to implement the…
A multi part printable shell casing for a Logitech C920 / C930 Webcam, removed from the manufacturer's shell. NOTE: I've updated the files: Removed the mount i previously designed to be printed, and updated the design to implement the…
Goal is pretty self explanatory. It prints in two parts, the holder needs supports but it's an easy print, the base you can get away without if you want. I left some of the supports on because I thought it looked quite good (just normal…
My old camera Logitech C270 was equiped with similar printed GoPro bracket for my printer camera holder too and the bracket change was made very easy. Unfortunately, Logitech C930 is different construction so i made new bracket for…
Somewhat a remix of "Logitech C920/C930E Prusa i3 MK3/MK3S X-axis holder" by hallonhatt. https://www.thingiverse.com/thing:3111450 I used the design of his arm. Most of the Z/X axis camera mounts for Ender 3's do not work on the newer Neo…
I remixed the design to have a 24-LED Version suitable for, e.g., this Ring: https://www.amazon.de/dp/B07GF2MK54/ref=cm_sw_em_r_mt_dp_U_wwSOEbFNSJ4YP the overall ring diameter is a bit smaller than the original but they fit more LEDs onto…
This is a mount for the logitech C930e, which has a standard 1/4-20 or M6 thread commonly used to mount DSLRs on tripods. This is a plate with a 6mm hole, connected to a cylinder joint that can be attached to arms from RaffoSan's camera…
Mounts a Logitech C920 to Prusa MK4 X-Axis Motor. All credit to hallonhatt and Rokkdaddy . i just mashed them together for my needs
Please check out MichaelQ's original model to get the other files required: https://www.printables.com/model/375059-original-prusa-enclosure-logitech-c920-c930-mount
