1 / 1
Samsung Odyssey OLED G9 G93SC (probably also fits the g95SC) Logitech C920/C930E webcam holder — zdjęcie 1

Samsung Odyssey OLED G9 G93SC (probably also fits the g95SC) Logitech C920/C930E webcam holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds a logitech camera nicely at a decent angle

Ocena
0 / 5
Polubienia
1
Pobrania
23
Wydruki
0
Wyświetlenia
480
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Goal is pretty self explanatory. It prints in two parts, the holder needs supports but it's an easy print, the base you can get away without if you want. I left some of the supports on because I thought it looked quite good (just normal grid).

I used an M6 bolt to just hold the two together with a insert on the top. To increase tilt clearance to the maximum the bolt is just a little visible but you don't really see it.

It's meant to give you maximium adjustment.

Note that you do need to dismantle the camera to remove the original mount as per the instructions here: https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077

Tagi