Samsung Odyssey OLED G9 G93SC (probably also fits the g95SC) Logitech C920/C930E webcam holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds a logitech camera nicely at a decent angle
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Goal is pretty self explanatory. It prints in two parts, the holder needs supports but it's an easy print, the base you can get away without if you want. I left some of the supports on because I thought it looked quite good (just normal grid).
I used an M6 bolt to just hold the two together with a insert on the top. To increase tilt clearance to the maximum the bolt is just a little visible but you don't really see it.
It's meant to give you maximium adjustment.
Note that you do need to dismantle the camera to remove the original mount as per the instructions here: https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077