Ender 3 S1 / S1 Pro Camera Mount for Logi C920 with IKEA Jasjö Lamp clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed mount with IKEA Jasjö Lamp clip, shorter arm, stronger joint and cable tidy.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 129
- Wydruki
- 4
- Wyświetlenia
- 1073
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original very nicely clips on to the end of the Z-axis rail. This version adds a small clip for the IKEA Jasjö USB lamp which is very cheap but quite effective, shortens the arm and strengthens it where it joins to the base clip (as I broke mine) and adds a little clip to tidy the cables away.
I believe this may work with other Logi cameras with the same base clip mechanism.
To add the lamp slot it in just behind the thicker part of the cable behind the lamp, then push in from the front. You may need to file this a little so that it is snug but not going to break the clip.
If you don't need the lamp clip, just blank it out with a negative additional cube part in your slicer
Printed at 0.24 using Basic Creality PLA (so any will do) with mouse ears and no supports.
EdinBearDragon
