Webcam (Spedal C920) Voron Internal Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spedal C920 camera mount, designed to mount the camera inside a Voron Trident.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 1184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a camera mount designed to fit inside the enclosure of a Voron Trident. It would probably work on a V2.4 as well. There are three parts - one which attaches to the 2020 extrusion, an “arm” that allows rotation in one dimension, and a mount for the camera in the other dimension. Check the pictures to see how I ended up mounting my camera, and for what it looks like in operation. Yes, the door shuts with this in place!
Routing the cable through the extrusion to get back to your Pi is its own adventure, and probably depends on how you built your printer. Good luck.
I didn't note what length of screws I ended up using - it SHOULD be primarily Voron BOM materials. In particular:
- 2x M3 heat set inserts (same as Voron BOM)
- 4x SHCS M3 bolts, miscellaneous lengths
- 2x M3 hammer nuts