1 / 2
EVA 2.4 for Sherpa-Mini/Mellow NF Libra on MGN9 linear rail — zdjęcie 1
1 / 2

EVA 2.4 for Sherpa-Mini/Mellow NF Libra on MGN9 linear rail

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

EVA 2.4 for Sherpa-Mini/Mellow NF Libra on MGN9 linear rail based on MFBS « Fast swap series »

Ocena
0 / 5
Polubienia
9
Pobrania
84
Wydruki
0
Wyświetlenia
1343
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is an adaptation of MFBS "Fast-Swap series" to extend compatibility for MGN9H rails and Sherpa-Mini or new Mellow NF Libra.
 

New top mount design featuring slots for integrated endstop.

Other compatibilities with original EVA 2.4 remain but you can also consider one of my other mods like XY-joiners reinforced for carbon gantry or tensionner-less back plate

For assembly you should use brass inserts from Ruthex (or similar): short M3x4.6x4mm

A smart solution to move tensioners on printer frame can be found here: https://store.brs-engineering.com/

This design has been developed from Pawel Kucmus's brilliant EVA eco system and inherits the same GPL license a the original.

This is not intended to be a replacement for the EVA system but rather a mod that better supports a limited range of hot ends and extruders.

For more information on the brilliant EVA system please see: https://main.eva-3d.page/


Print Settings

Printer:

RatRig Vcore-3

Rafts:

No

Supports:

Yes (Only for top mount from build plate)

Resolution:

0.2

Infill:

30%

Filament:

/ /

Tagi