1 / 3
Extruder Cooling Fan Duct with Cut-out for Delta-P Fan Mod — zdjęcie 1
1 / 3

Extruder Cooling Fan Duct with Cut-out for Delta-P Fan Mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of the Extruder Cooling Fan Duct with cut-out space to fit the Delta-P Fan Mod

Ocena
0 / 5
Polubienia
15
Pobrania
76
Wydruki
0
Wyświetlenia
553
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to make the fan shroud to cool off the motor of in the extruder of MK3S+. It is pretty hot during summer here. The original Extruder Cooling Fan Duct works great with stock extruder fanshroud. Because I wanted to make it work with Delta-P fan duct V2-R2 for MK3S(+) extruder mod, I create the remix with part of the air flow cut-out to fit the Delta-P fan duct.

Works with 40 x 40 mm fan. I connect the additional fan in parallel with the side extruder fan (5V). I was using a 12V fan, but it works fine with 5V input, a little weak though.

Print Setting

Filament: PETG

Support: No

Raft: No

Nozzle: 0.4 mm

Layer Height: 0.3 mm

Tagi