Extruder Cooling Fan Duct with Cut-out for Delta-P Fan Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the Extruder Cooling Fan Duct with cut-out space to fit the Delta-P Fan Mod
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 76
- Makes
- 0
- Views
- 553
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to make the fan shroud to cool off the motor of in the extruder of MK3S+. It is pretty hot during summer here. The original Extruder Cooling Fan Duct works great with stock extruder fanshroud. Because I wanted to make it work with Delta-P fan duct V2-R2 for MK3S(+) extruder mod, I create the remix with part of the air flow cut-out to fit the Delta-P fan duct.
Works with 40 x 40 mm fan. I connect the additional fan in parallel with the side extruder fan (5V). I was using a 12V fan, but it works fine with 5V input, a little weak though.
Print Setting
Filament: PETG
Support: No
Raft: No
Nozzle: 0.4 mm
Layer Height: 0.3 mm